Metal Gate Fabrication in Kalewadi, Pune
A main gate has to open smoothly every day while resisting sagging, street moisture, and heavy use. Sadik Fabrication designs and builds custom MS swing gates, sliding driveway gates, pedestrian wicket doors, and shop security gates measured accurately to your boundary pillars in Kalewadi, Pimpri-Chinchwad, and Pune.
Custom Gate Engineering Built for Daily Operation
Most gate headaches—scraping bottom edges, stuck latches, or noisy tracks—come from undersized outer tube frames, weak hinge pins, or un-leveled driveway floors. At our Kalewadi workshop, we reinforce gate perimeter frames with matched square tubes, corner gussets, heavy-duty pivot hinges or sealed floor casters, and cleanly welded lock hardware (tower bolts, padlock hasps, and mortise lock boxes).
Whether you are replacing an old boundary gate in Rahatani or Thergaon, or installing new apartment society gates in Wakad or Chinchwad, every leaf is fabricated to exact clear pillar width and driveway slope.
Gate Styles, Hardware & Material Options
| Gate Configuration | Best Suited Property | Structural & Hardware Details |
|---|---|---|
| Double-Leaf MS Swing Gate | Independent homes, bungalows, row houses | Grouted pivot hinges, central ground drop-bolt, optional wicket door |
| Sliding Track Gate | Narrow driveways, apartment stilt parking | MS angle/round-bar floor track, V-groove wheels, top guide rollers |
| Sheet-Clad & Louvered Privacy Gate | Road-facing compounds needing visual screening | MS sheet, horizontal louvers, or CNC laser-cut panels inside tube frame |
| Flat Safety Door & Collapsible Gate | Apartment main entries, shopfronts, passages | Heavy MS bar safety door with SS mesh or compact folding lattice |
Gate Customization Choices
Open Bars vs. Privacy Panels
Pick airy vertical/horizontal square bars, full MS sheet cladding, angled louvered slats for airflow, or laser-cut accent inserts.
Integrated Wicket Doors
Add a compact 3-foot pedestrian side door inside a 10–14 ft driveway gate for easy two-wheeler and foot access.
Smooth Hinge & Wheel Hardware
Heavy-pin bush hinges for swing leaves and sealed ball-bearing rollers on flat tracks for effortless sliding movement.
Primer & Security Locks
Supplied with red-oxide anti-rust primer plus heavy drop bolts, center latches, or mortise lock pockets ready for final enamel paint.
Common Gate Applications Across PCMC & Pune
- Residential compound main gates and two-wheeler side gates
- Apartment society entry and exit sliding gates with wheel tracks
- Front entrance steel safety doors (with optional mosquito mesh and peephole box)
- Shopfront collapsible gates and commercial godown barrier gates
- Terrace access iron security doors and MS structural frames
Gate Measurement, Fabrication & Fitting Process
- Pillar & Slope Survey: Measure clear gap between compound pillars, height requirement, and driveway slope clearance.
- Mechanism & Design Choice: Confirm swing vs. sliding track layout, infill style, and pedestrian wicket placement.
- Workshop Fabrication: Weld square-tube frame and infill bars cleanly, grind welds smooth, and coat with red-oxide primer.
- Pillar Grouting / Track Fixing: Anchor hinges into RCC/brick pillars or bolt leveled sliding track onto concrete driveway.
- Alignment & Latch Check: Test leaf swing, drop-bolt seating, lock clearance, and smooth rolling before handover.
What Affects Metal Gate Fabrication Cost?
Custom metal gate estimates depend directly on size, steel weight, and hardware:
- Gate Size & Frame Gauge: Wider spans need heavier outer tubes (e.g., 2×2 inch or 3×1.5 inch heavy-gauge pipe) to resist sagging.
- Design Complexity: Simple vertical bar gates weigh less than full sheet-clad, louvered, or CNC decorative sheet designs.
- Hardware & Mechanism: Sliding gates include floor rail channel, wheel blocks, and top guide brackets; wicket doors add extra hinges and lock sets.
- Site Masonry Prep: Pillar hinge grouting or floor track concrete cutting affects on-site labor.
Visual Reference & Gate Format
Double-Leaf Residential Compound Gate
Representative mild steel double-swing gate built to clear pillar dimensions in Kalewadi and Pimpri-Chinchwad. View additional formats in the Project Gallery.
Frequently Asked Questions About Metal Gates
A sliding gate saves parking space inside the compound because it glides parallel to the boundary wall instead of swinging inward or outward. However, it needs enough clear wall length beside the opening for the gate to retract.
Price depends on gate width and height, MS tube wall thickness, open-bar vs. sheet-clad/CNC pattern, sliding track and roller hardware, and pillar grouting requirements.
Yes. We routinely build a hinged pedestrian wicket door within one leaf of a swing or wide sliding gate for convenient daily foot and two-wheeler entry.
We pair heavy-gauge perimeter tubes and internal corner bracing with deep-grouted bush hinges or floor caster support wheels depending on leaf width.
Often yes. Through our welding fabrication service, worn hinges, rusted bottom rails, loose sliding tracks, or broken latches can be repaired or reinforced on site.
Yes. We build apartment front safety doors and shop collapsible gates alongside main compound gates for properties in Kalewadi and Pimpri-Chinchwad.
Request a Metal Gate Quote on WhatsApp
Share your gate width, height, swing or sliding preference, and locality below to send your quote enquiry directly on WhatsApp.